Call management
Audio and video calls
Redialing a number
About this task
You can configure your Collaboration to redial the last dialed number or display the Recents list from
which you can select a number to dial.
Procedure
1. Redialing using the Launch Panel or a new call container:
a. Tap Redial in the Launch Panel or tap the Redial control in a new call container.
Depending on the redial mode, the Collaboration Station displays the Input Panel with
the last dialed number or displays the Recents list.
b. Tap Audio Call or Video Call if the dial mode is set to manual, or wait for the
Collaboration Station to initiate the call.
2. Redialing using the empty Input Panel:
a. Tap Audio Call or Video Call.
The Collaboration Station displays the last dialed number in the Input Panel.
b. Tap Audio Call or Video Call if the dial mode is set to manual or wait for the
Collaboration Station to initiate the call.
Related links
Outgoing call management
Adding a participant to an active call
Procedure
1. In the active call container, tap Add Participant.
The Collaboration Station puts the active call on hold and displays a new call container.
2. In the new call container, make a call to the required contact.
3. When the contact answers the call, tap Merge.
The Collaboration Station merges the calls and starts a conference.
Calling the alternate number of a contact
Procedure
1. Go to the Contacts screen.
April 2016
on page 85
on page 84
Using Avaya H175 Video Collaboration Station
Comments on this document? infodev@avaya.com
88