Ficon-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Nx-os system messages reference
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

FICON Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
Error Message
Error Message
Error Message
FICON-5
Error Message
Cisco NX-OS System Messages Reference
2-220
FICON-3-E_ASSIGN_PROHIBIT_PN_FAIL: [chars]
Logical port address cannot be prohibited.
Explanation
Check port numbers in the command.
Recommended Action
FICON-3-E_DUPLICATE_PN_ASSIGN_WARNING: [chars]
Explanation
This port has the same port number assigned to other port in the same FICON VSAN.
No more than one port should have the same port number in each FICON VSAN.
Recommended Action
Avoid duplicate number assignment in each FICON VSAN\n.
FICON-3-E_INVALID_PA_BRINGUP_FAIL: [chars]
Explanation
This port either has an invalid port address assigned or has no port address assigned.
Assign a valid FICON port number to the port.
Recommended Action
FICON-3-E_PORT_PROHIBIT_BRINGUP_FAIL: [chars]
Explanation
This port has been prohibited. Prohibiting E or TE ports is not allowed. This port cannot
be configured in E mode or TE mode until the prohibit mask configuration is changed.
Correct the prohibit mask (PDCM) for this port if you wish to bring it up as
Recommended Action
an E or TE port in a FICON VSAN\n.
FICON-3-E_UNASSIGN_NO_PN_FAIL: [chars]
Only port number already assigned can be removed.
Explanation
Recommended Action
Check port numbers in the command.
FICON-3-PDCM_CHANGE_REJ_E_PORT: [chars]
The FICON Prohibit Dynamic Connectivity Mask(PDCM) change rejected because an
Explanation
E or TE port is being prohibited. Prohibiting an E or TE port in not allowed.
Recommended Action
Correct the prohibit mask (PDCM) for this port if you wish to bring the port
up as an E or TE port in a FICON VSAN\n.
FICON-5-STARTING: FICON Manager process starting
FICON Manager process is being started.
Explanation
No action is required.
Recommended Action
Chapter 2
System Messages and Recovery Procedures
OL-15994-03

Advertisement

Table of Contents
loading

Table of Contents