Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 415

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Message Return Code Error String ...
Recommended Action
Error Message
Explanation
Parameters: Error Description, M6RIB Function ...
Recommended Action
Error Message
Explanation
Parameters: API Call, Function ...
Recommended Action
Error Message
by \%s\
Explanation
Parameters: PIB Name ...
Recommended Action
Error Message
Explanation
Parameters: MTS Operation, Function, errorno, MTS Queue ...
Recommended Action
Error Message
Explanation
Parameters: Function Name, Line ...
Recommended Action
Error Message
Explanation
Parameters: Function Name, Line ...
Recommended Action
OL-15994-03
M6RIB-3-INIT_SDB Format: %s Return Code: 0x%x Error String: %s
SDB initialization has failed
No action is required.
M6RIB-3-KSINK_LIB_ERROR Format: %s %s
A error was encountered during ksink operations.
No action is required.
M6RIB-3-LIB_API_FAILED Format: %s failed in %s
Process failed in invoking an M6RIB API.
No action is required.
M6RIB-3-LIB_DUP_REGISTER Format: m6rib_register(): duplicate register
Dupilcate registration request to the M6RIB process, igored.
No action is required.
M6RIB-3-LIB_MTS_FAILED Format: %s failed in %s, errno: %s, for %s
Failure in M6RIB library to access mts-queue
No action is required.
M6RIB-3-LIB_SEM_INVALID Format: %s:%d: semaphore invalid in %s
M6RIB semaphore was found to be invalid when performing a semaphore operation
No action is required.
M6RIB-3-LIB_SEM_OP Format: %s:%d: semaphore operation %s failed
Caller failed to perform an operation on the M6RIB semaphore
No action is required.
Cisco NX-OS System Messages Reference
M6RIB Messages
2-377