Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 614

RPM Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
RPM-2
Error Message
%s()
Error Message
Error Message
an error 0x%08x(%s)
Error Message
with an error 0x%08x(%s)
Error Message
with an error 0x%08x(%s)
Cisco NX-OS System Messages Reference
2-576
RPM-2-LIB_MALLOC_FAILED Format: malloc() failed for allocating %s in
RPM API library is out of heap memory
Explanation
Parameters: Data, RPM Function ...
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
RPM-2-MALLOC_FAILED Format: malloc() failed for allocating %s in %s()
RPM process is out of heap memory
Explanation
Parameters: Data, RPM Function ...
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
RPM-2-PPF_SES_ABORT Format: PPF session abort failed in client %s with
RPM has detected an error during PPF abort operation.
Explanation
Parameters: PPF-Client, Error code, Error message ...
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
RPM-2-PPF_SES_COMMIT Format: PPF session commit failed in client %s
RPM encountered a serious error while committing the verified PBR policy changes to
Explanation
PBR clients
Parameters: PPF-Client, Error code, Error message ...
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
RPM-2-PPF_SES_RQST Format: PPF session request failed in client %s
Explanation RPM has detected an error while requesting PBR statistics from PBR clients
Parameters: PPF-Client, Error code, Error message ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03