Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 483

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Addresses, Function Name ...
Recommended Action
Error Message
Explanation
Parameters: Thread Name ...
Recommended Action
Error Message
in %s ; Explanation: PIM failed to delete the outgoing interface from route-table
entry.
Explanation
Parameters: Interface, Addresses, Function Name ...
Recommended Action
Error Message
Explanation
Parameters: Addresses, Function Name ...
Recommended Action
Error Message
Explanation
Parameters: Addresses, Function Name ...
Recommended Action
Error Message
Explanation
Parameters: Function Name ...
Recommended Action
Error Message
Explanation
Parameters: Interface ...
Recommended Action
OL-15994-03
PIM-3-CREATE_ROUTE Format: Couldn't create PIM route for %s in %s
PIM failed to update the local route-table entry.
No action is required.
PIM-3-CV_INIT Format: Couldn't init cond var %s
PIM process failed to initialize a conditional-variable resource.
Dump core, and and and then restart component.
PIM-3-DEL_IF Format: Couldn't delete interface %s from PIM route %s
The system has detected an error.
No action is required.
PIM-3-DEL_ROUTE Format: Couldn't delete PIM route %s in %s
PIM failed to delete the local route-table entry.
No action is required.
PIM-3-FREE_ROUTE Format: Couldn't free PIM route %s in %s
PIM failed to delete the route-table entry.
No action is required.
PIM-3-HEARTBEAT_TIMER Format: Unable to create heartbeat timer in %s
The system is unable to create heartbeat timer
Dump core, and and and then restart component.
PIM-3-IGMP_DOWN Format: Couldn't enable PIM on %s, IGMP is not up
PIM is not enabled on the interface, as it requires IGMP to be up.
No action is required.
Cisco NX-OS System Messages Reference
PIM Messages
2-445