Vpm-3; Vpm-4 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

VPM Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
VPM-6
Error Message
Error Message
Error Message
Error Message
Error Message
Error Message
manager: Reason=[chars]
Error Message
Cisco NX-OS System Messages Reference
2-802
VPM-6-BECAME_ACTIVE: Became ACTIVE from standby mode
The VP Manager on the standby supervisor became active and it is ready to serve client
Explanation
requests.
No action is required.
Recommended Action
VPM-6-BECAME_STDBY: Became STANDBY from active mode
The VP Manager became standby from active mode.
Explanation
No action is required.
Recommended Action
VPM-6-DG_DEREGISTERED: [chars]
The VP Manager has deregistered DG [chars] at slot=[dec] processor=[dec] and
Explanation
SAP=[dec].
No action is required.
Recommended Action
VPM-6-DG_REGISTERED: [chars]
The VP Manager has registered DG [chars] from slot=[dec] processor=[dec] and
Explanation
SAP=[dec].
No action is required.
Recommended Action
VPM-6-EXITING: Exited due to [chars]
The VP Manager process has exited due to [char]. The process has probably been
Explanation
restarted automatically.
No action is required.
Recommended Action
VPM-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system
The VP Manager was unable to send heartbeats to the system manager.
Explanation
No action is required.
Recommended Action
VPM-6-GENERAL_EVENT: [chars]
The VP Manager has generated an important event. The description of the event is [str.].
Explanation
Recommended Action No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03