Rip-4 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
RIP-5
Error Message
characters in keychain %s
Error Message
Error Message
OL-15994-03
RIP-4-VALIDATE_ENTRY Format: %s
A route entry in an incoming response packet is invalid
Explanation
Parameters: Error ...
Recommended Action No action is required.
RIP-4-VALIDATE_SRC Format: %s %s
An incoming packet has failed validation
Explanation
Parameters: Failure Reason, Interface Name ...
Recommended Action No action is required.
RIP-5-TOO_BIG_KEY_SIZE Format: Authentication key %s is > 16
Authentication key size is > 16 characters.
Explanation
Parameters: Authentication Key, Keychain Name ...
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
RIP-5-U6RIB_API_FAILURE Format: Failed to %s routes %s U6RIB
An API call to U6RIB has failed
Explanation
Parameters: Event, To/From ...
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
RIP-5-URIB_API_FAILURE Format: Failed to %s routes %s URIB
Explanation An API call to URIB has failed
Parameters: Event, To/From ...
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
Cisco NX-OS System Messages Reference
RIP Messages
2-571