Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 678

SVC Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
data corrupted - node rejected from cluster [chars]
Explanation
Recommended Action
re-added back to the cluster. 2. Ensure that the software is at the latest level on the cluster. If not,
upgrade the cluster and if necessary repeat step 1 with the latest level of code. 3. If the error
continues, ask IBM Product Support for assistance. It may be necessary to replace the Caching
Services Module.
Error Message
data unreadable - node rejected from cluster [chars]
Explanation
Recommended Action
re-added back to the cluster. 2. Ensure that the software is at the latest level on the cluster. If not,
upgrade the cluster and if necessary repeat step 1 with the latest level of code. 3. If the error
continues, ask IBM Product Support for assistance. It may be necessary to replace the Caching
Services Module.
Error Message
not valid [chars]
Explanation
Recommended Action
Error Message
error [chars]
Explanation
Recommended Action
probably faulty. Reload the node. If the error persists, replace the Caching Services Module.
Error Message
to form a cluster due to lack of cluster resources [chars]
Explanation
disk controller needed in order to form a cluster.
Recommended Action
cluster. If the quorum disk has failed, perform the problem determination procedures for the disk \
controller. Otherwise perform problem determination on the missing nodes and network.
Cisco NX-OS System Messages Reference
2-640
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_DATA_CORRUPT ) Node
Node data is readable but corrupted. The node has been rejected from the cluster.
1. Re-install the code on the node. The node will have to be removed and
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_DATA_UNREADABLE ) Node
Node data could not be read. The node has been rejected from the from cluster.
1. Re-install the code on the node. The node will have to be removed and
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_HDW_CONFIG ) Processor
The node has detected unexpected differences in the processor vital data.
Reload the node. If the problem persists, replace the Caching Services Module.
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_MEM_SIZE ) Memory size
The detected memory size does not match the expected memory size for the cluster.
A memory module on the Cisco MDS 9000 Caching Services Module is
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_MISSING_RES ) Unable
The node is unable to locate sufficient other nodes in the cluster and/or \ the quorum
Check the status of the quorum disk controller and the other nodes in the
Chapter 2 System Messages and Recovery Procedures
OL-15994-03