Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 436

MRIB Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
message on %s queue with opcode %d, dropping it
Explanation
Recommended Action
Error Message
Explanation
Parameters: Thread Name ...
Recommended Action
Error Message
mrib_delete_route_internal()
Explanation
Parameters: Group ...
Recommended Action
Error Message
mrib_delete_route_internal()
Explanation
Parameters: Source ...
Recommended Action
Error Message
Explanation
Parameters: Group ...
Recommended Action
Error Message
mrib_register_internal()
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Cisco NX-OS System Messages Reference
2-398
MRIB-3-MTS_SHORT_MSG_ERROR Format: Received short (%d < %d) MTS
MRIB received an unknown message. The message is dropped.
No action is required.
MRIB-3-MUTEX_INIT Format: Couldn't init mutex %s
The MRIB process has failed to initialize the mutex system resource.
Dump core, and then restart component.
MRIB-3-NO_FREE_GROUP Format: Unable to free group entry for %s in
MRIB process unable to delete a route-table entry.
No action is required.
MRIB-3-NO_FREE_SOURCE Format: Unable to free source entry for %s in
MRIB process unable to delete a route-table entry.
No action is required.
MRIB-3-NO_GROUP Format: Unable to create group entry for %s
MRIB process unable to create the route entry in its route-table.
No action is required.
MRIB-3-NO_MPIB Format: Unable to get mpib index in
MRIB process cannot register the protocol as it has run out of PIB indices.
Dump core, then reload the stack.
MRIB-3-NO_SET_PRIORITY Format: Failed to set policy or priority
MRIB process could not set itself process priority, exiting.
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03