Isis-5 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

ISIS Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
ISIS-6
Error Message
buffer from %s%s
Error Message
%s mode
Error Message
timer expired - enable process
Error Message
; Parameters: Reason, Reason Code ...
Error Message
Error Message
Cisco NX-OS System Messages Reference
2-326
ISIS-6-JUMBO_PDU Format: Drop %hu bytes jumbo PDU with %hu bytes
IS-IS has received a packet that exceeds the maximum supported size. The packet will
Explanation
be dropped.
Parameters: Packet Length,PDU Maximum Size, Interface Name, Source Destination Addr ...
No action is required.
Recommended Action
ISIS-6-MODE_NO_FUNC Format: No callback function registered for %s in
IS-IS encountered a problem where no callback function has been registered in the
Explanation
given mode
Parameters: Function name, Mode name ...
No action is required.
Recommended Action
ISIS-6-SEQWRAP_HOLDDOWN Format: Sequence number wraparound holddown
The correct amount of time has elapsed after an LSP's sequence number wrapped so
Explanation
that IS-IS can resume normal operation.
No action is required.
Recommended Action
ISIS-6-SHUTDOWN_FAILURE Format: Shutdown failure. Failed to %s - %s
IS-IS request to system manager for permission to shutdown was declined.
Explanation
Recommended Action No action is required.
ISIS-6-START Format: Process start. Reason - %s
ISIS procss start with specified reason
Explanation
Parameters: Reason ...
No action is required.
Recommended Action
ISIS-6-STOP Format: Process stop. Reason - %s
ISIS procss stop with specified reason
Explanation
Parameters: Reason ...
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03