Fcsp-Mgr-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

FCSP-MGR Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m

FCSP-MGR-2

Error Message
failed ( [chars] )
Error Message
E_Port failed ( [chars] )
Error Message
F_Port failed ( [chars] )
Error Message
FC-2 frame on [chars]
Error Message
[chars] (FC-SP Failure Reason: [chars] [chars])
Error Message
[chars] (reason:[chars])
Cisco NX-OS System Messages Reference
2-214
FCSP-MGR-2-DBG_INIT_FAILED: Debug Infrastructure Initialization
The system has detected an error.
Explanation
Recommended Action No action is required.
FCSP-MGR-2-FC2_E_INIT_FAILED: Fibre-Channel Initialization of an
Explanation FC-SP Manager has been unable to initialize with the FC-2 E-Port infrastructure.
No action is required.
Recommended Action
FCSP-MGR-2-FC2_F_INIT_FAILED: Fibre-Channel Initialization of an
FC-SP Manager has been unable to initialize with the FC-2 F-Port infrastructure.
Explanation
No action is required.
Recommended Action
FCSP-MGR-2-FC2_UNKNOWN_FRM_RECD_CRIT: Received an unexpected/unknown
The system has detected an error.
Explanation
No action is required.
Recommended Action
FCSP-MGR-2-FCSP_AUTHENT_FAILURE: FC-SP Authentication failure on Port
Fibre-Channel Authentication failure on Port [chars].(Reason Code [chars] Detail
Explanation
[chars]). Check password configurations and ensure appropriate security modes on this port as well
as peer port.
No action is required.
Recommended Action
FCSP-MGR-2-FCSP_ESP_MISMATCH: ESP parameters mismatch failure on Port
The system has detected a Fibre-Channel ESP parameters mismatch with the peer on
Explanation
Port [chars].(Reason: [chars]). Check ESP configurations on both side of the link and ensure
appropriate ESP mode on this port as well as peer port.
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03