Sysmgr-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
Error Message
directory. Aborting configuration copy.
Explanation
Recommended Action
initialize the configuration partition.
Error Message
configuration directory (error-id [hex]). Aborting configuration copy.
Explanation
could not be removed.
Recommended Action
initialize the configuration partition.
Error Message
configuration (error-id [hex]). Aborting configuration copy.
Explanation
startup-config could not be stamped.
Recommended Action
initialize the configuration partition.
Error Message
(error-id [hex]). Aborting configuration copy.
Explanation
could not lock the required configuration items.
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
configuration: [chars] (error-id [hex]). Aborting configuration copy.
Explanation
could not be created.
Recommended Action
initialize the configuration partition.
OL-15994-03
SYSMGR-2-CFGWRITE_ABORTED: Configuration copy aborted.
A configuration copy has failed.
Verify the other syslog messages printed correct the problem, and try again.
SYSMGR-2-CFGWRITE_ABORTED_DIR: Unable to open the configuration
The destination location for the startup-config could not be found.
If the problem persists, please use the vshboot command 'init system' to
SYSMGR-2-CFGWRITE_ABORTED_INIT: Unable to initialize the
An attempt to copy the running-config to startup-config has failed because the old data
If the problem persists, please use the vshboot command 'init system' to
SYSMGR-2-CFGWRITE_ABORTED_LABEL: Unable to label the new
An attempt to copy the running-config to startup-config has failed because the new
If the problem persists, please use the vshboot command 'init system' to
SYSMGR-2-CFGWRITE_ABORTED_LOCK: Unable to lock the configuration
An attempt to copy the running-config to startup-config has failed because the system
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
SYSMGR-2-CFGWRITE_ABORTED_LOG: Unable to open a log file for the new
An attempt to copy the running-config to startup-config has failed because a log file
If the problem persists, please use the vshboot command 'init system' to
Cisco NX-OS System Messages Reference
SYSMGR Messages
2-675