Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 60

AM Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Cisco NX-OS System Messages Reference
2-22
AM-2-SVR_REG Format: Failed to register as a client of %s for VRF %s
An unrecoverable software error has occurred during the AM initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
AM-2-SYSMGR_NAME Format: Failed to get name from sysmgr during %s
An unrecoverable software error has occurred during the AM initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
AM-2-SYSMGR_NOTIFY Format: Bad notification from sysmgr for %s
An unrecoverable software error has occurred during the AM initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
AM-2-SYSMGR_QUERY Format: Failed to query sysmgr for %s
An unrecoverable software error has occurred during the AM initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
AM-2-SYSMGR_UUID Format: Failed to get uuid from sysmgr during %s
An unrecoverable software error has occurred during the AM initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
AM-2-THR_CREAT Format: Failed to create thread %s: error %d
An unrecoverable software error has occurred during the AM initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
AM-2-THREAD_FAIL Format: Failed to start %s thread
An unrecoverable software error has occurred during the AM initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
Chapter 2 System Messages and Recovery Procedures
OL-15994-03