Bgp-1; Bgp-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Server Name ...
Recommended Action
Error Message
Explanation
Parameters: Queue name, MTS SAP, Error ...
Recommended Action
Error Message
Explanation
Parameters: Server Name ...
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Parameters: MQLoop Type, Failure Type, Error ...
Recommended Action
Error Message
Explanation
Parameters: Queue name, MTS SAP, Error ...
Recommended Action
Error Message
(%s)
Explanation
Parameters: Peer(s), Error ...
Recommended Action
Support web site http://www.cisco.com/tac.
OL-15994-03
BGP-2-APIINIT Format: Unable to initialize %s API
An unrecoverable error has occurred during BGP initialization.
Use the 'restart' command to restart the feature and clear this problem.
BGP-2-APIMTSBIND Format: Unable to bind to MTS SAP for %s, sap %d: %s
BGP client was not able to create a message queue for communication.
Use the 'restart' command to restart the feature and clear this problem.
BGP-2-ATTACH Format: Unable to attach to %s
An unrecoverable error has occurred during BGP initialization.
Use the 'restart' command to restart the feature and clear this problem.
BGP-2-IPV6REG Format: Unable to register with IPv6
An unrecoverable error has occurred during BGP initialization.
Use the 'restart' command to restart the feature and clear this problem.
BGP-2-MQLOOP_INIT Format: Message queue loop %s, %s, Error - %s
An unrecoverable error has occurred during BGP initialization.
Use the 'restart' command to restart the feature and clear this problem.
BGP-2-MTSBIND Format: Unable to bind to MTS SAP for %s, sap %d: %s
BGP was not able to create a message queue for communication.
Use the 'restart' command to restart the feature and clear this problem.
BGP-2-PEERSHALTED Format: BGP %s shutdown due to no memory condition
The system may be low on memory.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Cisco NX-OS System Messages Reference
BGP Messages
2-45