Rpm-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
with an error 0x%08x(%s)
Error Message
%d with payload size %d - in %s()
Error Message
%s()
Error Message
%s()
RPM-3
Error Message
OL-15994-03
RPM-2-PPF_SES_VERIFY Format: PPF session verify failed in client %s
Explanation RPM has detected an error while pushing PBR policy changes during the verify stage
to PBR clients
Parameters: PPF-Client, Error code, Error message ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
RPM-2-PSS_SYNC_BUFFER Format: Crossed pss sync buffer size limit of
RPM tried to PSS synchronizationa message exceeding the maximum allowed size
Explanation
Parameters: Pss synchronizationbuffer size, Message payload size, RPM Function ...
Recommended Action No action is required.
RPM-2-SMALLOC_FAILED Format: smalloc() failed for allocating %s in
RPM process is out of shared memory. This could be due to temporary increase in the
Explanation
number of policies configured to a very high value
Parameters: Data, RPM Function ...
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
RPM-2-SRV_INIT_API_FAIL Format: %s failed during initialization in
RPM called a server API during initialization which returned an error.
Explanation
Parameters: Init. Function, RPM Function ...
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
RPM-3-API_FAILED Format: %s - failed in %s()
Explanation RPM invoked an API which failed. This is an unexpected but manageableevent.
Parameters: Failed API, RPM Function ...
No action is required.
Recommended Action
Cisco NX-OS System Messages Reference
RPM Messages
2-577