Dot1X Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

DOT1X Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
DOT1X Messages
This section contains the DOT1X messages.
DOT1X-2
Error Message
DOT1X-3
Error Message
Error Message
Error Message
Cisco NX-OS System Messages Reference
2-128
DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_START: Job Id:%Ld NumSession:[dec]
Event indicating the start of a Data Migration Job Verification.
Explanation
No action is required.
Recommended Action
DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_STOP: Job Id:%Ld NumSession:[dec]
Explanation Event indicating the Suspension of Data Migration Job Verification by the user.
No action is required.
Recommended Action
DOT1X-2-DOT1X_INIT: Dot1x unable to start
Explanation The system failed to create the Dot1x process.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
DOT1X-3-ERR_SPANDST: It is configured as a SPAN Dest port.
Dot1x and SPAN Dest ports are mutually exclusive features.
Explanation
Recommended Action Disable SPAN destination port configuration first before reconfiguring Dot1x
on the port.
DOT1X-3-INVALID_INPUT: Invalid on interface [chars].
The Dot1x interface parameter is out of the specified range or is invalid.
Explanation
Recommended Action Refer to the CLI help documentation to determine the valid 802.1x parameters.
DOT1X-3-MEM_UNAVAIL: perform the 802.1X action.
Insufficient system memory is available to perform the Dot1x Authentication.
Explanation
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant,
upgrade to a larger memory configuration.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03