Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 201

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
balance algorithm has been configured to [chars]
Explanation
Recommended Action
Error Message
online because port channel interface <port-channel number> greater than [dec] is
present
Explanation
Recommended Action
greater than 128.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
hot-standby
Explanation
Recommended Action
Error Message
[chars] is down
Explanation
Recommended Action
Error Message
down
Explanation
Recommended Action
OL-15994-03
ETH_PORT_CHANNEL-5-LOAD_BALANCE_CONFIGURED: Port-channel load
The system has detected a load balance algorithm has been changed.
No action is required.
ETH_PORT_CHANNEL-5-MAX_CHANNEL_DISALLOWED: Module failed to come
The port channel number configured on the switch is larger than 128.
Delete the set of port channel interface <port channel interface> which is
ETH_PORT_CHANNEL-5-PORT_ADDED: [chars] added to [chars]
Ports are added to a port channel.
No action is required.
ETH_PORT_CHANNEL-5-PORT_DOWN: [chars]: [chars] is down
Port goes down in a port channel.
No action is required.
ETH_PORT_CHANNEL-5-PORT_HOT_STANDBY: [chars]: [chars] goes to
Port goes to hot-standby in a port channel.
No action is required.
ETH_PORT_CHANNEL-5-PORT_HOT_STANDBY_DOWN: [chars]: hot-standby port
The system has detected a hot-standby member goes down.
No action is required.
ETH_PORT_CHANNEL-5-PORT_INDIVIDUAL_DOWN: individual port [chars] is
The system has detected a member operating in individual mode goes down.
No action is required.
ETH_PORT_CHANNEL Messages
Cisco NX-OS System Messages Reference
2-163