Eth_Port_Channel-1 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
ETH_PORT_CHANNEL-2
Error Message
responding or returning error
ETH_PORT_CHANNEL-3
Error Message
dropping notif:[chars] (for:[chars]); Please collect <show system internal mts
buffers details>
Error Message
Error Message
Error Message
Error Message
[dec]: [chars]
OL-15994-03
ETH_PORT_CHANNEL-2-RESET_MODULE: reset module [dec] for not
A module is reset for not responding or returning error.
Explanation
Recommended Action No action is required.
ETH_PORT_CHANNEL-3-ALL_DROP_TIMEOUT: Some component(s) timed out on
A component did not respond to a request in a stipulated time.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
ETH_PORT_CHANNEL-3-COMPAT_CHECK_FAILURE: [chars] is not compatible
Compatibility check failed when adding ports to port channel.
Explanation
Recommended Action Make sure the compatibility parameters are consistent while adding ports to
port channel, or use force option.
ETH_PORT_CHANNEL-3-GENERAL_ERROR: [chars]
General error.
Explanation
Recommended Action No action is required.
ETH_PORT_CHANNEL-3-LACP_ERROR: [chars] [chars]
LACP error.
Explanation
No action is required.
Recommended Action
ETH_PORT_CHANNEL-3-MSG_SEND_FAILURE: failed to send [chars] to sap
Explanation The system has failed to send a message.
No action is required.
Recommended Action
ETH_PORT_CHANNEL Messages
Cisco NX-OS System Messages Reference
2-159