Vrrp-Eng-4; Vrrp-Eng-5 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

VRRP_CFG Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
VRRP-ENG-6
Error Message
request result [chars]
VRRP_CFG Messages
This section contains the VRRP_CFG messages.
VRRP_CFG-2
Error Message
VRRP_CFG-3
Error Message
Error Message
operation
Cisco NX-OS System Messages Reference
2-808
VRRP-ENG-6-VSHA_RESULT: VR ID [dec] on interface [chars] state change
The result of the request for status change on the virtual router (with VSHA extension)
Explanation
specified is [chars].
No action is required.
Recommended Action
VRRP_CFG-2-ALLOC_MEMORY: Memory allocation failed
The service failed to allocate a block of dynamic memory.
Explanation
No action is required.
Recommended Action
VRRP_CFG-3-INIT_FAILED: Initialization failed. Component [chars]
The system has detected that the service has failed to start. The failure occurred while
Explanation
initializing the component [chars].
Enter the show processes command to check the status of the other processes,
Recommended Action
debug the specified component.
VRRP_CFG-3-VRRP_FEATURE_MANAGER_ERROR: Error in feature manager
The feature manager operation had an error.
Explanation
Check the reason for error using feature manager and fix the problem.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03