Eth_Port_Sec Messages; Eth_Port_Sec-5 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
Error Message

ETH_PORT_SEC Messages

This section contains the ETH_PORT_SEC messages.
ETH_PORT_SEC-3
Error Message
MACs
Error Message
OL-15994-03
ETH_PORT_CHANNEL-7-START_DEFAULT: started with default configuration
The system has detected a manager started with default configuration.
Explanation
No action is required.
Recommended Action
ETH_PORT_CHANNEL-7-START_STANDBY: started in standby mode
Explanation The system has detected a manager started in standby mode.
No action is required.
Recommended Action
ETH_PORT_CHANNEL-7-START_STATEFUL: started statefully
Explanation The system has detected a manager started with running configuration.
No action is required.
Recommended Action
ETH_PORT_CHANNEL-7-START_STATELESS: started statelessly
The system has detected a manager started with startup configuration.
Explanation
No action is required.
Recommended Action
ETH_PORT_SEC-3-ETH_PORT_SEC_CONFIG_MAC_FAILED: Failed to configure
The system has failed to configure MAC addresses.
Explanation
No action is required.
Recommended Action
ETH_PORT_SEC-3-ETH_PORT_SEC_INVALID_VLAN: Invalid VLAN configuration
The system has detected an invalid VLAN configuration.
Explanation
Recommended Action No action is required.
ETH_PORT_SEC Messages
Cisco NX-OS System Messages Reference
2-165