Chapter 2
System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
WWN-6
Error Message
Error Message
Error Message
Error Message
Error Message
manager: Reason=[chars]
Error Message
Error Message
OL-15994-03
WWN-6-ALLOCATED_BLOCK: Block number [dec]
The WWN Manager has allocated a new block, block number [dec], of 256 WWNs for
Explanation
internal use.
No action is required.
Recommended Action
WWN-6-BECAME_ACTIVE: Became ACTIVE from standby mode
The WWN Manager on the standby supervisor became active and it is ready to serve
Explanation
client requests for WWNs.
No action is required.
Recommended Action
WWN-6-BECAME_STDBY: Became STANDBY from active mode
The WWN Manager became standby from active mode.
Explanation
No action is required.
Recommended Action
WWN-6-EXCESSIVE_DELAY: [chars]
Excessive time taken for a processing event. The description of the event is [str.].
Explanation
No action is required.
Recommended Action
WWN-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system
The WWN Manager was unable to send heartbeats to the system manager.
Explanation
Recommended Action
No action is required.
WWN-6-GENERAL_EVENT: [chars]
Explanation
The WWN Manager has generated an important event. The description of the event is
[str.].
Recommended Action
No action is required.
WWN-6-PSS_CREATED: [chars] PSS Created
One of the persistent information database of the WWN Manager has been recreated.
Explanation
No action is required.
Recommended Action
Cisco NX-OS System Messages Reference
WWN Messages
2-821
Need help?
Do you have a question about the AP775A - Nexus Converged Network Switch 5010 and is the answer not in the manual?
Questions and answers