Fcdomain-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
table is completely full
Explanation
<VSAN-id>] to view the entries currently in the table. No more entries can be saved as persistent
FCIDs across reboots.
Recommended Action
disable the feature on certain VSANs which are not critical enough [no fcdomain fcid persistent].
Error Message
failed
Explanation
for its high priority queue.
Recommended Action
Error Message
Explanation
depends on resources not available at the moment: the switch might be short in memory or some
other component might be unable to provide the necessary information to fcdomain.
Recommended Action
Error Message
failed
Explanation
(Inter Process Communication) subsystem. fcdomain depends on resources not available at the
moment: the switch might be short in memory or some other component might be unable to provide
the necessary information to fcdomain.
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Service failed
Explanation
Communication (IPC) module.
Recommended Action
OL-15994-03
FCDOMAIN-2-FCID_PERSISTENT_TBL_COMPLETELY_FULL: FCID persistent
The FCID persistent table is full. Perform [show fcdomain fcid persistent VSAN
Purge stale entries [purge fcdomain fcid] to obtain more free entries OR
FCDOMAIN-2-HIGH_PRIORITY_MTSBIND_FAILED: Bind for high priority IPC
Fcdomain has not been able to contact the Inter Process Communication (IPC) module
No action is required.
FCDOMAIN-2-INITIALIZATION_FAILED: Initialization sequence failed
The fcdomain has not been able to complete the initialization sequence. fcdomain
No action is required.
FCDOMAIN-2-MTS_INITIALIZATION_FAILED: IPC initialization sequence
The fcdomain has not been able to complete the initialization sequence with the IPC
No action is required.
FCDOMAIN-2-MTSBIND_FAILED: Bind to IPC failed
Fcdomain has not been able to contact the Inter Process Communication (IPC) module.
No action is required.
FCDOMAIN-2-MTSREGISTRATION_FAILED: Registration of opcodes with IPC
Fcdomain has not been able to register its messages with the Inter Process
No action is required.
FCDOMAIN Messages
Cisco NX-OS System Messages Reference
2-193