Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 686

SVC Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Volume Controller to be repaired or deleted from the cluster. While the downgrade operation is in
progress, configuration commands sent to the cluster will fail with a message indicating that a
software upgrade operation is still in progress. The downgrade operation might take up to three
hours.
Recommended Action
the offline node from the cluster. If the delete fails with a message indicating that a software upgrade
is in progress, this means that the downgrade process is still active. Wait for this operation to either
complete or stop on the offline node and then retry the delete. If the downgrade operation had
stopped, it will now continue. 3. Solve all logged hardware problems 4. Ask the user to retry the
software install. 5. If the installation fails again, report the problem to your software support center.
6. Mark the error you have just repaired as fixed.
Error Message
SS_EID_IC_EV_UPGRADE_PCK_DELIVERY_FAILED ) Software install package cannot be
delivered to all nodes [chars]
Explanation
Recommended Action
perform problem determination on the node and bring the node back online. Or, alternatively, delete
the offline node from the cluster. 3. Retry the software retry the delete. If the downgrade operation
had stopped, it will now continue. 3. Solve upgrade command. 4. If the installation fails again, report
the problem to your software support center.
Error Message
Connection to a configured remote cluster has been lost [chars]
Explanation
Recommended Action
Error Message
Copy suffered loss of synchronization [chars]
Explanation
a reason other than a continuous I/O error.
Recommended Action
Mark the error you have just repaired as fixed.
Error Message
Copy suffered persistent error [chars]
Explanation
Recommended Action
the error you have just repaired as fixed.
Cisco NX-OS System Messages Reference
2-648
1. Display the status of the nodes on the cluster. 2. If any node is offline, delete
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec]
An error has occurred while sending the software package to the nodes.
1. Display the status of the nodes on the cluster. 2. If any node is offline,
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_PLIC_LINK )
This cluster is no longer able to communicate with the remote copy partner cluster.
Perform problem determination on the network and the other cluster.
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_RC_ER_LSYNC ) Remote
In a remote-copy operation, the relationship has stopped and lost synchronization, for
1. Correct higher priority errors, and and and then restart the remote copy. 2.
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_RC_ER_PERS ) Remote
A Remote Copy relationship has been stopped because of a continuous I/O error.
1. Correct the higher priority errors, then retry the Remote Copy task. 2. Mark
Chapter 2 System Messages and Recovery Procedures
OL-15994-03