Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 487

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Service / Queue description ...
Recommended Action
Error Message
Explanation
Parameters: Error String ...
Recommended Action
Error Message
Explanation
Parameters: MSG Queue Name, Error String ...
Recommended Action
Error Message
Explanation
Parameters: Thread Name ...
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Parameters: MTS Opcode, Error string ...
Recommended Action
Error Message
Explanation
Recommended Action
OL-15994-03
PIM-3-MTS_INIT Format: Could not initialize MTS for %s
The system is unable to register opcodes
Dump core, and and and then restart component.
PIM-3-MTS_RECV Format: Error returned from mts_recv(), errno: %s
PIM called an MTS API which returned an error.
Dump core, and and and then restart component.
PIM-3-MTSOPEN Format: Couldn't bind %s mts-q: %s
PIM failed to open the MTS-queue resource.
Dump core, and and and then restart component.
PIM-3-MUTEX_INIT Format: Couldn't init mutex %s
PIM process failed to initialize the mutex system resource.
Dump core, and and and then restart component.
PIM-3-NO_SET_PRIORITY Format: Failed to set policy or priority
PIM process could not set itself process priority, exiting.
No action is required.
PIM-3-OPCODE_REG Format: Could not register opcode 0x%x, reason %s
The system is unable to register opcodes
Dump core, and and and then restart component.
PIM-3-PIM_API_NOT_INIT Format: PIM API not initialized
PIM API is not initialized.
No action is required.
Cisco NX-OS System Messages Reference
PIM Messages
2-449