Ficon-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
FICON-3
Error Message
Error Message
Error Message
Error Message
OL-15994-03
FICON-2-E_PN_PA_NOT_IN_BOUND: [chars]
Port number or port address in startup configuration is out of bound.
Explanation
Change FICON port number assign configuration and save to startup
Recommended Action
configuration.
FICON-2-E_SAVE_FILE: [chars]
Failed to save file. Possibly due to asymmetric pdcm matrix. Look for retval for actual
Explanation
reason.
Recommended Action Configure port prohibits in symmetrically.
FICON-2-SHUTDOWN: FICON Manager process shutting down: [chars]
FICON Manager shutting down.
Explanation
Recommended Action This is a error. Provide the reason given in the message\n.
FICON-3-E_ASSIGN_BINDING_PN_FAIL: [chars]
Port number has fcip or port channel binding cannot be removed or changed.
Explanation
Remove port number binding of the logical interface first.
Recommended Action
FICON-3-E_ASSIGN_INVALID_PN_PARAM: [chars]
Invalid port number parameters in command.
Explanation
Recommended Action Check port numbers in the command.
FICON-3-E_ASSIGN_OVERLAP_PN_FAIL: [chars]
Port number assigned to physical and logical cannot overlap.
Explanation
Recommended Action Check port numbers in the command.
FICON-3-E_ASSIGN_PN_NOT_DOWN_FAIL: [chars]
Explanation Only port number assigned to a port in down state can be removed or changed.
Bring down the port first.
Recommended Action
Cisco NX-OS System Messages Reference
FICON Messages
2-219