Chapter 2
System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
vsan: [dec], sid: [hex], did: [hex] is now valid
ACLTCAM-6
Error Message
AM Messages
This section contains the AM messages.
AM-2
Error Message
Error Message
Error Message
OL-15994-03
ACLTCAM-4-ACL_TCAM_FLOW_COUNTER_VALIDATED: Flow counter for flow:
Explanation
ACLTCAM process validated the flow counter for flow VSAN [dec] SID [hex] DID
[hex].
No action is required.
Recommended Action
ACLTCAM-6-ACL_TCAM_STATUS: Status: [chars].
ACLTCAM status is reported as: [chars].
Explanation
Recommended Action
No action is required.
AM-2-API_INIT Format: Failed to initialize %s API
An unrecoverable software error has occurred during the AM initialization.
Explanation
Recommended Action
Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
AM-2-BAD_TIMER Format: %s
An unrecoverable software error has occurred during the AM initialization.
Explanation
Recommended Action
Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
AM-2-CLI_INIT Format: Failed to initialize CLI
An unrecoverable software error has occurred during the AM initialization.
Explanation
Recommended Action
Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Cisco NX-OS System Messages Reference
AM Messages
2-19