PORT_CHANNEL Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
PORT-SECURITY-6
Error Message
PORT_CHANNEL Messages
This section contains the PORT_CHANNEL messages.
PORT_CHANNEL-1
Error Message
[[chars]]
Error Message
Error Message
[chars] [[chars]]
Error Message
[chars]
Cisco NX-OS System Messages Reference
2-530
PORT-SECURITY-6-INFO: [chars]
An error has occurred that affects PSM. [chars] indicates the event.
Explanation
No action is required.
Recommended Action
PORT_CHANNEL-1-LC_CFG_FAILURE: configuring module [dec] failed
Module configuration failed.
Explanation
Recommended Action
Module will be automatically reset.
PORT_CHANNEL-1-MALLOC_FAILED: cannot allocate memory (size [dec])
Not enough memory.
Explanation
No action is required.
Recommended Action
PORT_CHANNEL-1-MAP_PARAM_FAILURE: mapping parameter failed for
Parameter mapping failed.
Explanation
Specified service has failed; check its status.
Recommended Action
PORT_CHANNEL-1-MCAST_SEND_FAILURE: failed to send multicast [chars]:
The system has failed to send a multicast message to all modules, usually because some
Explanation
module went down.
Run show port channel consistency to check consistency.
Recommended Action
Chapter 2
System Messages and Recovery Procedures
OL-15994-03