Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 462

NPV Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
Error Message
balancing timer for [dec] seconds
Error Message
NPV-7
Error Message
Cisco NX-OS System Messages Reference
2-424
NPV-6-NPIV_DISABLED: [chars]
NPIV feature has been disabled.
Explanation
No action is required.
Recommended Action
NPV-6-NPIV_ENABLED: [chars]
Explanation NPIV feature has been enabled.
No action is required.
Recommended Action
NPV-6-NPV_ENABLE_DISABLE_IN_PROGRESS: [chars]
Explanation NPV feature enable/disable is in progress. This sylog is printed at the beginning of
various significannot phases.
No action is required.
Recommended Action
NPV-6-NPV_LOAD_BALANCE_TIMER_START: (Re)starting automatic load
Explanation Timer started for upon external interface up or server interface down. When the timer
goes off some of the server interfaces may be reinitialized to evenly distRIBute the server interfaces
among the eligible external interfaces.
Recommended Action No action is required.
NPV-6-SERVER_PROXY_LOGO_SENT: [chars]
Explanation NPV process sent a LOGO frame to the core switch as the server interface went down.
No action is required.
Recommended Action
NPV-7-CFS_REQ_RCVD: [chars]
CFS request is received. The WWN of the switch originated this request and the
Explanation
rr-token of the request are provided in the syslog message.
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03