Diag_Port_Lb Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

DIAG_PORT_LB Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
DIAG_PORT_LB Messages
This section contains the DIAG_PORT_LB messages.
DIAG_PORT_LB-2
Error Message
for Diag VLAN:[dec]. Error:[chars].
Error Message
send to Module Manager failed . Error:[chars]
Error Message
Error Message
failed.
Error Message
Error Message
Test:PortLoopback failed [dec] consecutive times. Faulty module:[chars] affected
ports:[chars] Error:[chars]
Cisco NX-OS System Messages Reference
2-114
DIAG_PORT_LB-2-GET_DIAG_BD_FAIL: [chars]([dec]) Failed to get the BD
Explanation Failed to get the BD corresponding to the Diag VLAN.
No action is required.
Recommended Action
DIAG_PORT_LB-2-LCM_RESP_SEND_FAILURE: LC Inserted request response
The system has failed to send the response for LC insertion to Module Manager.
Explanation
No action is required.
Recommended Action
DIAG_PORT_LB-2-LIF_GET_ERROR: [chars]([dec]) [chars] Error:[chars]
Port Loopback test process failed to get Diagnostic LIF id.
Explanation
No action is required.
Recommended Action
DIAG_PORT_LB-2-MALLOC_FAILURE: [chars]([dec]) Memory allocation
Port Loopback test process could not allocate enough memory.
Explanation
Recommended Action No action is required.
DIAG_PORT_LB-2-MTS_LIB_ERROR: [chars]([dec]) [chars]. Error:[chars]
Port Loopback test process failed in MTS API.
Explanation
No action is required.
Recommended Action
DIAG_PORT_LB-2-PORTLOOPBACK_TEST_FAIL: Module:[dec]
The PortLoopback test has failed on the module consecutively.
Explanation
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03