Dhcp_Snoop Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

DHCP_SNOOP Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
DHCP_SNOOP Messages
This section contains the DHCP_SNOOP messages.
DHCP_SNOOP-2
Error Message
Error Message
Error Message
Error Message
DHCP_SNOOP-3
Error Message
Cisco NX-OS System Messages Reference
2-108
DHCP_SNOOP-2-HWPGMFAILURE: Hardware programming has failed: [chars]
Hardware programming has failed. [chars] explains the reason for the failure.
Explanation
No action is required.
Recommended Action
DHCP_SNOOP-2-INITFAIL: DHCP Daemon Initialization failed: [chars]
Explanation DHCP daemon initialization has failed. [chars] explains the reason for the failure.
No action is required.
Recommended Action
DHCP_SNOOP-2-PSSERROR: [chars]
Explanation DHCP Daemon encountered a PSS error. [chars] specifies the context where the failure
occurred.
No action is required.
Recommended Action
DHCP_SNOOP-2-REGPARTREE: Unable to register par tree: [chars]
Explanation Could not register par tree. [chars] explains the reason for the failure.
No action is required.
Recommended Action
DHCP_SNOOP-3-ALLOCFAIL: Heap Memory allocation failed: [chars]
DHCP Daemon is out of dynamic memory. [chars] specifies the context where the
Explanation
failure occurred.
Recommended Action No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03