Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 363

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
reached - %d routes
Error Message
reached - %d routes
Error Message
ISIS-5
Error Message
Error Message
disabling process for %d secs
OL-15994-03
ISIS-4-REDIST_MAX_ROUTE Format: Redistribution route limit has been
Explanation The system has detected an ISIS redistRIBution: Max limit has been reached
Parameters: Number of routes ...
No action is required.
Recommended Action
ISIS-4-REDIST_THR_ROUTE Format: Redistribution threshold has been
Explanation The system has detected an ISIS redisTRIBution: Threshold limit has been reached
Parameters: Number of routes ...
No action is required.
Recommended Action
ISIS-4-SEQWRAP Format: Sequence number wraparound event detected
Explanation IS-IS has detected that an LSP's sequence number has wrapped. IS-IS will shut down
and restart.
No action is required.
Recommended Action
ISIS-5-ADJCHANGE Format: %s adj L%s %s over %s - %s
The indicated adjacency has changed its state.
Explanation
Parameters: Interface Type, Level, The system ID, Interface Name, Reason ...
No action is required.
Recommended Action
ISIS-5-PROC_SEQWRAP Format: Handle sequence number wraparound -
An LSP's sequence number has wrapped, and the process will be disabled for the
Explanation
correct length of time.
Parameters: Time ...
No action is required.
Recommended Action
Cisco NX-OS System Messages Reference
ISIS Messages
2-325