Diag_Port_Lb-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

DIAG_PORT_LB Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
for Diag VLAN:[dec]. Error:[chars].
Explanation
Recommended Action
Error Message
[chars]:[hex] [chars] [chars]
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
failed.
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Cisco NX-OS System Messages Reference
2-116
DIAG_PORT_LB-3-GET_DIAG_BD_FAIL: [chars]([dec]) Failed to get the BD
Failed to get the BD corresponding to the Diag VLAN.
No action is required.
DIAG_PORT_LB-3-IFINDEX_LIB_FAILURE: [chars]([dec]) [chars]
Port Loopback test process failed in if_index library API.
No action is required.
DIAG_PORT_LB-3-INVALID_TEST_REQUEST: [chars]([dec]) [chars]:[dec]
Port Loopback test process failed to get test request info.
No action is required.
DIAG_PORT_LB-3-INVALID_TEST_RUN: [chars]([dec]) [chars]:[dec]
Port Loopback test process failed to get the current test run information.
No action is required.
DIAG_PORT_LB-3-LIF_GET_ERROR: [chars]([dec]) [chars] Error:[chars]
Port Loopback test process failed to get Diagnostic LIF id.
No action is required.
DIAG_PORT_LB-3-MALLOC_FAILURE: [chars]([dec]) Memory allocation
Port Loopback test process could not allocate enough memory.
No action is required.
DIAG_PORT_LB-3-MTS_LIB_ERROR: [chars]([dec]) [chars]. Error:[chars]
Port Loopback test process failed in MTS API.
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03