Msdp-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

MSDP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
Error Message
%s
Explanation
Parameters: TLV type, TLV length, Peer IP address ...
Recommended Action
Error Message
Explanation
Parameters: MTS function name, Function in which MTS function failed, Error message ...
Recommended Action
Error Message
Explanation
Parameters: Malloc function, Function in which Malloc failed ...
Recommended Action
Error Message
Explanation
Parameters: MQ function name, Function in which MQ function failed, Error message ...
Recommended Action
Error Message
Explanation
Parameters: Function name, mRIB_add_route ...
Recommended Action
Error Message
Explanation
Parameters: Component Name ...
Recommended Action
Cisco NX-OS System Messages Reference
2-404
MSDP-3-FM_ERROR Format: FM could not shut down MSDP process
MSDP could not process the disable-req from FM.
Dump core, and and and then restart component.
MSDP-3-INVALID_TLV Format: Invalid TLV, type: %d, length: %d from peer
MSDP process received an invalid packet. Appropriate error packet returned.
No action is required.
MSDP-3-LIB_MTS_FAILED Format: %s failed in %s, errno: %s
Process failed to access the MSDP mts-queue.
No action is required.
MSDP-3-MALLOC_FAILED Format: %s failed in %s
MSDP process is out of free memory.
Configure the network or router to decrease the number of routes.
MSDP-3-MQ_FAILED Format: %s failed in %s, errno: %s
The MSDP process has failed to access the message-queue.
No action is required.
MSDP-3-MRIB_ROUTE Format: In %s, %s failed to add mrib route
The MSDP process has failed to add mRIB routes.
No action is required.
MSDP-3-MSDP_INIT Format: MSDP init failed: %s
MSDP process initialization has failed.
Dump core, and then restart component.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03