Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 67

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
OL-15994-03
ARP-2-MTS_BIND Format: Failed to do mts_bind for %s: %s
An unrecoverable software error has occurred during ARP initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
ARP-2-MTS_RECV Format: MTS queue receive failed on %s queue: %s
An unexpected fatal error has occurred.
Use 'reload' command to reload the system. Be aware that this problem affects
ARP-2-SET_SCHED Format: Failed to set policy or priority
An unrecoverable software error has occurred during ARP initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
ARP-2-SHM_ATTACH Format: Failed to attach %s shared memory
An unrecoverable software error has occurred during ARP initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
ARP-2-SVR_REG Format: Failed to register as a client of %s
An unrecoverable software error has occurred during ARP initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
ARP-2-SYSMGR_NOTIFY Format: Bad notification from sysmgr for %s
An unrecoverable software error has occurred during ARP initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
ARP-2-SYSMGR_QUERY Format: Failed to query sysmgr for %s
An unrecoverable software error has occurred during ARP initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
Cisco NX-OS System Messages Reference
ARP Messages
2-29