Platform Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m

PLATFORM Messages

This section contains the PLATFORM messages.
PLATFORM-0
Error Message
switch
Error Message
clock-[dec]
Error Message
Error Message
for [dec] seconds
Error Message
Sensor=[dec] Temperature=[dec] MajThreshold=[dec]
OL-15994-03
PLATFORM-0-CHASSIS_CLKSW_MODULE_RESET: Modules reset due to clock
Explanation Chassis clock source has switched and all Vegas line cards will be reset. The system
will automatically continue using redundant clock module.
Refer to the platform document on clock modules.
Recommended Action
PLATFORM-0-CHASSIS_CLKSWITCH: Hardware clock switched to redundant
Explanation Clock module on chassis deteted a failure and switched to redundant clock module.
Enter the 'the show platform internal command
Recommended Action
rmationcommandrmationcommand' to collect more information.
PLATFORM-0-CHASSIS_CLKSWRESET: Switch reset due to clock switch
Explanation Chassis clock source has failed and system will be reset. The system will automatically
start using redundant clock module.
Refer to the platform document on clock modules.
Recommended Action
PLATFORM-0-FAIL_REMOVED: Fan module removed. Fan[dec] has been absent
Fan module is removed. This could lead to temperature alarms.
Explanation
Replace the fan module as soon as possible.
Recommended Action
PLATFORM-0-MOD_TEMPMAJALRM: [chars] reported Major temperature alarm.
Module in slot [decimal digit] exceeded major temperature threshold.
Explanation
Enter a 'show env temperature' to collect more information.
Recommended Action
PLATFORM Messages
Cisco NX-OS System Messages Reference
2-473