Msdp Messages; Mrib-5; Mrib-6 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

MSDP Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
MSDP Messages
This section contains the MSDP messages.
MSDP-2
Error Message
Error Message
setup in %s
Error Message
suspect TLV length of %d from peer %s
Error Message
sync, suspect TLV type of %d from peer %s
Cisco NX-OS System Messages Reference
2-402
MRIB-6-USAGE Format: Usage: mrib [-h] [-d] [-m <memory-in-mb>]
Usage for starting MRIB process.
Explanation
No action is required.
Recommended Action
MSDP-2-NO_ENQUEUE Format: Unable to enqueue send element for peer %s
Explanation The MSDP process has failed to send a message over the TCP socket to peer.
Parameters: Peer IP address ...
Recommended Action No action is required.
MSDP-2-NO_LISTEN_SOCKET Format: Fatal error, can't get listen socket
Explanation The MSDP process has failed to obtain TCP packet.
Parameters: Function name ...
Dump core, and and and then restart component.
Recommended Action
MSDP-2-OUT_OF_SYNC_TCP_LEN Format: TCP data stream may be out of sync,
MSDP process received invalid packet length from peer.
Explanation
Parameters: TLV length, Peer IP address ...
No action is required.
Recommended Action
MSDP-2-OUT_OF_SYNC_TCP_TYPE Format: TCP data stream may be out of
MSDP process received malformed TLV from peer.
Explanation
Parameters: TLV type, Peer IP address ...
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03