Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 740

SYSMGR Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
[chars], that is in scope [dec] (not the boot scope).
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
[chars] is not allowed.
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
but uses UUID [hex].
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Error Message
failed(error-id [hex]).
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Cisco NX-OS System Messages Reference
2-702
SYSMGR-3-INVALID_PFM_HANDSHAKE: PFM-handshake received from service
A service is trying to take actions that belong to the Platform Manager service.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
SYSMGR-3-INVALID_TRANSITION: Transition from state [chars] to state
Unexpected transition in the The system Manager state machine.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
SYSMGR-3-INVALID_UUID: Service [chars] is configured with UUID [hex],
The identity of a service is inconsistent in the image file.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
SYSMGR-3-ISSU_BEGIN_FAILED: ISSU cannot proceed (error-id [hex]).
This message indicates that some service has blocked the ISSU.
No action is required.
SYSMGR-3-LC_IMAGE_UPGRADE_FAILURE: Linecard image upgrade request
Linecard image upgrade request failed.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
SYSMGR-3-LC_RESET: Resetting linecard
Linecard is being reset.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Chapter 2 System Messages and Recovery Procedures
OL-15994-03