Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 99

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
%lu
BGP-4
Error Message
Error Message
time check failed
Error Message
than system switchover time (%d seconds)\n
Error Message
OL-15994-03
BGP-3-VRF_CTX Format: VRF %s, failed %s
An internal software error occurred.
Explanation
Parameters: VRF Name, Operation ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
BGP-3-VRFAVL_OP Format: Failed vrf database operation: %s, vrf %s id
BGP was unable to perform a vrf database operation.
Explanation
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
BGP-4-APIMTSNOMSG Format: No MTS payload found on %s queue, opc %d
An unexpected but recoverable event has occurred.
Explanation
Parameters: Queue name, MTS Opcode ...
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
BGP-4-ISSU_CHECK Format: Not ready for ISSU: Graceful Restart or hold
No user action is required.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
BGP-4-ISSU_HOLDTIME Format: ISSU will be affected if hold time is less
No user action is required.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
BGP-4-MAXPEERS Format: Trying to configure more than %d neighbors
No user action is required.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
Cisco NX-OS System Messages Reference
BGP Messages
2-61