Sysmgr-7 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
service [chars], but information already available.
Explanation
Recommended Action
Error Message
libcdb.
Explanation
is no conversion library needed for this service.
Recommended Action
Error Message
libvdb.
Explanation
service in the version database.
Recommended Action
Error Message
state during non-disruptive upgrade.
Explanation
Recommended Action
Error Message
Explanation
found no configuration to convert.
Recommended Action
Error Message
switchover actions.
Explanation
Recommended Action
Error Message
service [chars] ([chars]).
Explanation
Recommended Action
OL-15994-03
SYSMGR-7-DUPLICATED_PFM_HANDSHAKE: PFM-handshake received from
This message is for Cisco TAC debugging. This is not a problem or malfunction.
No action is required.
SYSMGR-7-LIBCDB_FAILURE: Conversion for service [chars] failed in
This message indicates that either the system could not find conversion tarball or there
No action is required.
SYSMGR-7-LIBVDB_FAILURE: Conversion for service [chars] failed in
This message indicates that the system could not find package information for this
No action is required.
SYSMGR-7-ND_UPGD_RECOVERY_SRVSUCCEEDED: Service [chars] recovered its
The system has detected an error.
No action is required.
SYSMGR-7-NO_STARTUP_CONFIG: No startup-config to convert.
This message indicates that the system tried to convert startup configuration but it
No action is required.
SYSMGR-7-SWITCHOVER_SRVSUCCEDED: Service [chars] completed its
This message is for Cisco TAC debugging. This is not a problem or malfunction.
No action is required.
SYSMGR-7-UNEXPECTEDMSG: Opcode [dec] not expected at this time from
This message is for Cisco TAC debugging. This is not a problem or malfunction.
No action is required.
Cisco NX-OS System Messages Reference
SYSMGR Messages
2-715