Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 178

EIGRP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Function ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message
Explanation
Parameters: Pthread operation, Function, Thread name ...
Recommended Action
Error Message
Explanation
Recommended Action
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message
Explanation
Parameters: Opcode, Reason ...
Recommended Action
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Cisco NX-OS System Messages Reference
2-140
EIGRP-2-NO_MEMORY Format: Can't allocate memory in function %s
Cannot allocate memory in specified function.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
EIGRP-2-NO_SET_PRIORITY Format: Failed to set policy or priority
EIGRP process could not set itself process priority, exiting.
Restart the component when the system is working.
EIGRP-2-PROCINFO_CREATE_FAIL Format: eigrp_procinfo creation failed
Failed to create procinfo.
EIGRP process still operational. Send the error log message and the running
EIGRP-2-PTHREAD_FAILED Format: %s failed in %s for thread %s
EIGRP process failed to create a task thread.
Restart the component when the system is working.
EIGRP-2-REG_L3VM Format: Failed to register with l3vm
Failed to register with the l3vm process.
EIGRP process still operational. Send the error log message and the running
EIGRP-2-REG_OPCODE Format: Could not register opcode 0x%x, reason %s
Could not register mts opcode with the reason.
EIGRP process still operational. Send the error log message and the running
Chapter 2 System Messages and Recovery Procedures
OL-15994-03