Device-Alias-6 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Nx-os system messages reference
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

DEVICE-ALIAS Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message

DEVICE-ALIAS-6

Error Message
Error Message
Error Message
be imported due to definition conflict
Error Message
be imported due to having unsupported member type
Cisco NX-OS System Messages Reference
2-100
DEVICE-ALIAS-3-VALIDATION_REJECTED: [chars]
Validation request received from remote switch is rejected. [chars] indicates the reason
Explanation
for failure.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
DEVICE-ALIAS-6-CLEAR_FAILED_INFO: [chars]
An error has occurred while clearing the session. [chars] indicates the additional
Explanation
information regarding failure.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
DEVICE-ALIAS-6-COMMIT_FAILED_INFO: [chars]
Explanation
An error has occurred while committing the database. [chars] indicates the additional
information regarding failure.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
DEVICE-ALIAS-6-IMPORT_DEFINITION_CONFLICT: Fcalias [chars] could not
Explanation
Fcalias [chars] could not be imported due to definition conflict. Either there is already
a device-alias configuration present with the same definition OR another VSAN specified in the
import VSAN range has an fcalias with the same definition.
Recommended Action
Resolve the conflict and issue the import command again.
DEVICE-ALIAS-6-IMPORT_MEMBER_TYPE_CONFLICT: Fcalias [chars] could not
Explanation
Fcalias [chars] could not be imported due to having unsupported member types. Fcalias
can be imported only if it has Port WWN based members.
Recommended Action
Make sure that the fcalias has Port WWN based members and issue the import
command again.
Chapter 2
System Messages and Recovery Procedures
OL-15994-03

Advertisement

Table of Contents
loading

Table of Contents