Scsi-Target-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

SCSI-TARGET Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m

SCSI-TARGET-3

Error Message
RATOV from VSAN Manager, error: [hex]
Error Message
to error: [hex]
Error Message
failed due to error: [hex]
Error Message
error: [hex]
Error Message
due to error: [hex]
Cisco NX-OS System Messages Reference
2-588
SCSI-TARGET-3-PROC_VSAN_GET_RATOV_FAIL: Failed to get vsan attribute
SCSI-target process used the VSAN_get_global_value() API for RATOV and it failed
Explanation
due to error [hex].
This is a non-fatal error. The default value for RATOV is used. Collect more
Recommended Action
information using the commands 'show process cpu' and 'show system internal sysmgr service all'.
See VSAN Manager system error codes for reason.
SCSI-TARGET-3-PSS_CREATE_FAIL: pss create runtime database failed due
SCSI-target process pss create runtime database failure due to error [hex]. No SCSI
Explanation
discovery can be performed.
Collect more information by using the show flash command. See the pss
Recommended Action
system error codes for the information about the failure.
SCSI-TARGET-3-PSS_DELETE_FAIL: pss delete runtime entry key:[hex]
SCSI-target process pss delete runtime entry key [hex] failure due to error [hex].
Explanation
Collect more information by using the show flash command. See the pss
Recommended Action
system error codes for the information about the failure.
SCSI-TARGET-3-PSS_MAX_KEY_FAIL: pss set runtime max key failed due to
SCSI-target process pss set runtime max key failure due to error [hex]. No SCSI
Explanation
discovery can be performed.
Collect more information by using the show flash command. See the pss
Recommended Action
system error codes for the information about the failure.
SCSI-TARGET-3-PSS_MAX_VALUE_FAIL: pss set runtime max value failed
SCSI-target process pss set runtime max value failure due to error [hex]. No SCSI
Explanation
discovery can be performed.
Collect more information by using the show flash command. See the pss
Recommended Action
system error codes for the information about the failure.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03