Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 630

SDV Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
Error Message
Error Message
SDV-4
Error Message
failed:[chars]. Retrying the request again.
Cisco NX-OS System Messages Reference
2-592
SDV-3-LOCK_FAILED: [chars]
An error has occurred while acquiring the lock. The reason for the failure : [chars].
Explanation
No action is required.
Recommended Action
SDV-3-MERGE_ACTIVATION_FAILED: [chars]
Explanation Error while activating the merged SDV database due to [chars].
No action is required.
Recommended Action
SDV-3-MERGE_CAP_FAILED: [chars]
Explanation SDV fabric merge failed because of incomaptible capabilities [chars].
Compare SDV configuration in both fabrics and resolve the conflicts if any
Recommended Action
and commit the changes.
SDV-3-MERGE_FAILED: [chars]
Explanation SDV fabric merge failed due to [chars].
Check the error using show sdv merge status VSAN <VSAN-id> command.
Recommended Action
Compare SDV configuration in both fabrics and resolve the conflicts if any and commit the changes.
SDV-3-MTS_ERR: [chars]
The SDM process encountered an MTS error due to [chars].
Explanation
No action is required.
Recommended Action
SDV-4-FCID_REWRITE_REQUEST_TO_ACL_FAILED_AND_RETRYING:
Explanation This happens when either any of the line cards being upgraded or ACL experienced
error while processing the request.
Recommended Action No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03