Snmp View Settings - Dell PowerConnect 6224 User Manual

SNMP notifications are enabled, and the device is updated.
Enabling Authentication Trap
1. Open the Global Parameters page
2. Select Enable in the Authentication trap field.
3. Click Apply Changes.
Authentication notifications are enabled, and the device is updated.
Enabling SNMP Notifications Using CLI Commands
For information about the CLI commands that perform this function, see the SNMP Commands chapter
CLI Reference Guide
in the
enable SNMP notifications.
Table 6-40. SNMP Notifications Commands
CLI Command
show snmp engineID
show snmp engineid
show trapflags
snmp-server enable traps
snmp-server engineID local

SNMP View Settings

Use this page to create views that define which features of the device are accessible, and which are
blocked. You can create a view that includes or excludes OIDs corresponding to interfaces.
Use the SNMP View Settings page to define SNMP views.
To display the SNMP View Settings page, click System → SNMP → View Settings in the tree view.
220
Configuring System Information
.
. The following table summarizes the equivalent CLI commands you use to
Description
Displays the SNMP engine ID.
Displays the SNMP engine ID.
Shows the status of the configurable SNMP traps.
Enables SNMP traps globally or enables specific SNMP traps.
Specifies the Simple Network Management Protocol (SNMP) engine
ID on the local switch.