Host Name Mapping - Dell PowerConnect 6224 User Manual

The Default Domain Name page contains the following field:
• Default Domain Name (0
configured, the default domain name is applied to all unqualified host names.
Defining DNS Domain Names Using CLI Commands
For information about the CLI commands that perform this function, see the IP Addressing Commands
CLI Reference Guide
chapter in the
use to define DNS domain names.
Table 6-16. DNS Domain Names Commands
CLI Command
ip domain-name

Host Name Mapping

Use the Host Name Mapping page to assign an IP address to a static host name. The Host Name
Mapping page provides one IP address per host.
To display the Host Name Mapping page, click System → IP Addressing → Host Name Mapping.
Figure 6-25. Host Name Mapping
The Host Name Mapping page contains the following fields:
• Host Name — Contains a list of host names. Host names are defined on the Add Static Host Name
Mapping page. Each host provides one IP address.
• IP Address — Provides an IP address that is assigned to the specified host name.
• Remove Host Name — Removes the host name IP mapping when checked.
146
Configuring System Information
255 characters) — Contains the user-defined default domain name. When
–
. The following table summarizes the equivalent CLI commands you
Description
Use to define a default domain name to complete unqualified host
names.