Defining Snmp View Settings - Dell PowerConnect 54 Series User Manual

Version 3 notifications
Target
Address
--------
System Contact: Robert
System Location: Marketing

Defining SNMP View Settings

SNMP Views provides access or blocks access to device features or feature aspects. For example, a view can
be defined which states that SNMP group A has read only (R/O) access to Multicast groups, while SNMP
group B has read-write (R/W) access to Multicast groups. Feature access is granted via the MIB name, or
MIB Object ID.
The Up and Down arrows allow navigating through the MIB tree, and MIB branches.
To open the SNMPv3 View Settings page, click System →SNMP
Figure 6-71. SNMPv3 View Settings
• View Name — Contains a list of user-defined views. The view name can contain a maximum of 30
alphanumeric characters. The possible field values are:
176
Configuring System Information
Type Username
---- --------- -------- ----
Security Udp Filter
Level Port name
------ ---
→ View Settings in the tree view.
To Retries
Sec
-------