Dell PowerConnect 6224 User Manual page 716

Table 12-1. Multicast Global Commands
CLI Command
ip pimsm spt-threshold
ip pimsm ssm
show ip mcast
show ip mcast boundary
show ip mcast interface
show ip mcast mroute
show ip mcast mroute group
show ip mcast mroute source
show ip mcast mroute static
show ip pimsm bsr
show ip pimsm interface
show ip pimsm rphash
show ip pimsm rp mapping
716
Configuring IP Multicast
(continued)
Description
Configures the Data Threshold rate for the last hop router to switch to
the shortest path.
Defines the Source Specific Multicast (SSM) range of IP multicast
addresses.
Displays the system-wide multicast information.
Displays all the configured administrative scoped multicast
boundaries.
Displays the multicast information for the specified interface.
Displays a summary or all the details of the multicast table.
Displays the multicast configuration settings such as flags, timer
settings, incoming and outgoing interfaces, RPF neighboring routers,
and expiration times of all the entries in the multicast mroute table
containing the groupipaddr value.
Displays the multicast configuration settings such as flags, timer
settings, incoming and outgoing interfaces, RPF neighboring routers,
and expiration times of all the entries in the multicast mroute table
containing the sourceipaddr or sourceipaddr | groupipaddr pair
value(s).
Displays all the static routes configured in the static mcast table if it is
specified or display the static route associated with the particular
sourceipaddr.
Displays the bootstrap router (BSR) information.
Displays interface config parameters.
Displays which rendezvous point (RP) is being selected for a specified
group.
Displays all group-to-RP mappings of which the router is aware (either
configured or learned from the bootstrap router (BSR)).