Configuring and Viewing sFlow Settings Using CLI Commands
For information about the CLI commands that perform this function, see the Flow Commands chapter
CLI Reference Guide
in the
configure and view sFlow settings.
Table 6-63. sFlow Settings Commands
CLI Command
show sflow agent
sFlow Receiver Configuration
Use the sFlow Receiver Configuration page to configure the sFlow Receiver.
To access the sFlow Receiver Configuration page, click System → sFlow → Receiver Configuration in the
navigation tree.
Figure 6-123. sFlow Receiver Configuration
The sFlow Receiver Configuration page contains the following fields:
•
Receiver Index — Selects the receiver for which data is to be displayed or configured. The allowed
range is 1 to 8.
. The following table summarizes the equivalent CLI commands you use to
Description
Displays the sflow agent information.
Configuring System Information
273