Plugged-in Model Identifier — A 16-byte character string to identify the plugged-in model of the
•
selected unit.
Switch Status — Displays the status of the selected unit. The possible values are:
•
–
OK — The unit is in place and functioning.
–
Unsupported — The unit is in place, but can not function as a member of the stack.
–
Code Mismatch — The software of the switch does not match the master unit software.
Config Mismatch — The configuration of the switch does not match the master unit
–
configuration.
–
Not Present — The selected unit is not present.
Switch Description — 80-byte data field used to identify the device.
•
Expected Code Type — Displays the expected code identifier.
•
Detected Code Version — Running code version release number and version number.
•
Detected Code in Flash — Release number and version number of the code detected in flash.
•
Up Time — Displays how long the unit has been running since its last reset.
•
Remove Switch — Select this option to remove switch from the stack.
Stack Summary
Use the Stack Summary page to view a summary of switches participating in the stack.
To display the Stack Summary page, click System → Stacking → Stack Summary in the tree view.
Figure 6-112. Stack Summary
The Stacking Summary page contains the following fields:
•
Switch ID — ID of the unit. The maximum number of units allowed in the stack is 12.
•
Management Status — This field indicates whether the switch is currently operating as the
management switch, the standby switch, or a stack member.
252
Configuring System Information