Ipv6 Acl Rule Configuration - Dell PowerConnect 6224 User Manual

IPv6 ACL Rule Configuration

Use the IPv6 ACL Rule Configuration page to define rules for IPv6-based ACLs. The access list
definition includes rules that specify whether traffic matching the criteria is forwarded normally or
discarded. Additionally, you can specify to assign traffic to a particular queue, filter on some traffic,
change VLAN tag, shut down a port, and/or redirect the traffic to a particular port. By default, no specific
value is in effect for any of the IPv6 ACL rules.
There is an implicit "deny all" rule at the end of an ACL list. This means that if an ACL is applied to a
packet and if none of the explicit rules match, then the final implicit "deny all" rule applies and the
packet is dropped.
To display the IPv6 ACL Rule Configuration page, click Switching → Network Security → Access Control
Lists → IPv6 Access Control Lists → Rule Configuration in the navigation menu.
Figure 7-17. IPv6 ACL - Rule Configuration
The IPv6 ACL Configuration page contains the following fields:
• IPv6 ACL Name — Select the ACL you want to configure.
312
Configuring Switching Information